Jay Hirst, Richard Wade and I were on site today.
We fitted and reconnected the driver's side tail lamp unit, not the easiest of tasks, as access to put the nuts on the bolts is difficult under the driver's desk. We then belled out and marked all the wires from the change-end switches in both cabs. The mounting plates that hold the change-end switches below the driver's seat were strikingly different to each other. One appeared almost new, the other has significant corrosion. Neither of them lined up to the mounting holes in No.1 cab, which surprised us, so we used the better condition one and started drilling new holes to mount it.
